Wednesday, January 18, 2012

The Kala II: Electric Bugaloo

The same shape as this board; I used the template to design the frames for a one-off wood board. I went with a nice bookmatched redwood top and a lauan bottom (ripped and alternated at the stringer and glassed on both faces). All in all I still prefer a properly planked bottom but the lauan is quick and easy to work with, and looks good. I went with a bonzer fin setup with an FCS trailer rather than the regular large single fin – I intend to surf this one as a slippery twin as well as the bonzer setup.  The smaller side fins are glassed on and made of meranti marine plywood.
Artwork is a kala I shot a while back (hence the name) and printed up myself. I wanted to see how the heavy rice paper would glass, and it came out nice. The blue highlights cover the deck-rail joint, which due to the heavy dome of the deck came out uneven. The lizard on the bottom was heat-transferred directly on to the wood.
Rails are strip-planked with alternating white fir and mahogany. The leash plug is stacked ply, cut and worked by hand with a stainless bolt as the anchor.
Video of the gyotaku process after the pics.

No comments:

Post a Comment